Please have a look at the rear swash bolt that keeps the swash in position. In this step we have to estimate the usefol throw of the swashplate. The rest to 90deg can be done with the single servo trim in the pc software. Therefore delete all trims (auto and manual) in pc soft and mount them in 90deg (as best as possible). You have to look only for the servo horns (90deg), swash (levelled and mid of travel), swash driver and main head (0deg).įirst we align the servo horns (pc soft, menue swash trim). Helis with direct linkages have a small advantage. ![]() a image tells you more than 1000 words and so we did some examples for main and tail rotor here. Our rod length will be deifned during this setup automaticlly.Įven if you remember this rule no more explanations will be needed. We use the complete servo travels and forces as best as we can. Work always from servo to the blades, everything centered, in line and levelled. There is one very basic rule that works in any case: ![]() From time to time we were asked about the best way to set up a heli mechanically or how long the rods should be.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |